L4D2 - config? aim? rolfon?

elo guys.

have been playing left 4 dead 2 with some friends yesterday and, like in l4d 1, the aim always felt a little bit delayed (comparable to "smooth" aim enabled in ET).
is there a way to disable this "feature", in favor of a more intermediate aim?
in HL2 it was fine - and it's still the same engine isn't it? just modified.

thx
Comments
15
Blol.No.GtFO.Though I've got my QL account back but the plugin wont let me install it. :(
HELL YEAH. ELC ALM=ST BCAK ON TRACK LULZ!
I SEND U TEH FILES??! AFTERNOON?! ME NOW GO WORK?!
Parent
Glol no. Tomorrow's eve is the time to slac those newbs with cb ca tdm weapons.

edit: meanwhile upload it somewhere (]§x~D
Parent
i smell sum biatches in here
Parent
go and wash yourself then but be aware of the knives!
Parent
biatches gonna roll :DD
Parent
(]§x~~DDDDDDDDDD
Parent
Go in your video advanced settings and turn off virtual/vertical sync or w/e it is, that'll remove the delay for sure :)
thx, will give it a try
Parent

// *******************************************************************
// * Kaizen's Left 4 Dead 2 Performance Config
// * v1.1 (Nov 21, 2009)
// *******************************************************************
// * Copyright (C) 2008-2009 Next Level Gamer (www.nextlevelgamer.com)
// * and respective copyright owners. All Rights Reserved.
// *******************************************************************
// * HTTP://WWW.NEXTLEVELGAMER.COM, KAIZEN AND ALL AFFILAITE PARTIES
// * ASSUME NO LIABILITY FOR DAMAGES INCURRED DIRECTLY OR INDIRECTLY
// * AS A RESULT OF ERRORS, OMISSIONS OR DISCREPANCIES FOUND WITHIN
// * ANY VERSION OF KAIZEN'S LEFT 4 DEAD 2 PERFORMANCE CONFIG. USE
// * OF THIS CONFIG IS ENTIRELY AT YOUR OWN RISK
// *******************************************************************
//
//
//
// INTRODUCTION
// *******************************************************************
// Kaizen's L4D2 performance config is designed to boost your frame
// rates (FPS) while maintaining the best possible graphics experience.
// It also attempts to improve hit registration (i.e. the accuracy of
// your shots) by optimizing network settings, improve the visibility
// of the crosshair, and increase brightness so you can see enemies
// better.
//
// Unfortunately, as was the case with the original L4D, L4D2
// restricts most of the Source Engine's console commands. Many of the
// best performance options can only accessed via the in game menu's.
// Feel free to tweak any of the settings to your liking, descriptions
// of what commands do are provided.
//
// If you have any suggestions, questions or other feedback please
// visit www.nextlevelgamer.com and post on the forums.
//
//
// Enjoy!
// - Kaizen ([email protected])
//
//
//
// INSTALLATION INSTRUCTIONS
// *******************************************************************
// Place this file (autoexec.cfg) into your Left 4 Dead 2 CFG folder,
// similar to the path below:
//
// <install folder>\Steam\SteamApps\common\left 4 dead 2\left4dead2\cfg\
//
//
//
// STEAM LAUNCH OPTIONS
// *******************************************************************
//
// For an additional performance boost, customize your command line
// launch options for Left 4 Dead 2 in Steam before starting the game
//
// Setting Launch Options
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
// 1. Go to "My Games" in Steam
// 2. Right click "Left 4 Dead 2" and select "Properties"
// 3. Select "Set launch options..." and enter the following:
//
// -w 1680 -console -refresh 120 -heapsize 1572864 -high -noforcemaccel -noforcemparms -noipx -nojoy
//
//
// Customizing Launch Options
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
// -w 1680 Sets resolution to 1680x1050; for 16:10 widescreen monitors - tweak as necessary
// -console Enables developer console; so you can press ~ to enter commands
// -novid Disables the intro movie, speeds up game on start-up (doesn't seem to work in L4D2 yet though)
// -refresh 120 Forces 120hz/120fps refresh rate on monitor (if available)
// -heapsize 1572864 Allocates RAM for the game; see table below for calculating optimal values
// -high Forces high CPU priority
// -noforcemaccel Forces desktop mouse acceleration settings
// -noforcemparms Forces desktop mouse button configuration
// -noipx Disables IPX network detection, local LAN (slight boot time improvement; you may need to remove this for LAN parties)
// -nojoy Disables detection of 3rd party gamepads and controllers (slight boot time improvement)
//
// Heapsize Setting
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
// Modify the heapsize command to allocate 50% of the RAM you have
// in your computer (NOT video card memory!) in bytes.
//
// Formula = RAM (in GB) * 1024 * 1024 / 2
// 1GB -heapsize 524288
// 2GB -heapsize 1048576
// 3GB+ -heapsize 1572864
//
// Since L4D2 is a 32-bit application it is believed to be capped at
// a maximum of 3GB of RAM. Setting heapsize to a value beyond this
// may crash the game.
//
//
// For a detailed guide on Steam launch options, refer to:
// http://www.nextlevelgamer.com/counter-strike-source-launch-options/
//
//
//
// Removal Instructions:
// *******************************************************************
// Don't like the config? Simply delete autoexec.cfg and config.cfg
// from Steam\SteamApps\common\left 4 dead 2\left4dead2\cfg\
// Depending on your Steam Cloud settings, you may need to redefine
// your key bindings and personal preferences after this.
//
// Note: - Brightness too high? Set mat_monitorgamma_tv_enabled to 0
// - Prefer default crosshair? Set cl_crosshair_dynamic 1
//
//
// Additional Performance Links
// *******************************************************************
//
// Left 4 Dead 2 Performance Tweaking Guide
// http://www.nextlevelgamer.com/left-4-dead/left-4-dead-2-performance-tweaking-guide
//
// General Performance Tweaking Articles
// http://www.nextlevelgamer.com/tweaks
//
// Special Thanks Version 1.1
// *******************************************************************
// - To KeRupTion and mystrdat of the Steam forums for finding better
// values of the network variables found in version 1.1
// - To Fiszy, Kirisu, Jesse_lee, adsqew132 and anyone else I've missed
// for their support and general interest in this config
// - The entire Left 4 Dead 2 community


// *******************************************************************
// START OF KAIZEN'S LEFT 4 DEAD 2 PERFORMANCE CONFIG
// *******************************************************************

// Startup Settings
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
con_enable "1" // default 0; Enables Console
sv_cheats "1" // Enable Cheats (relax, this enables some CVARS to load, we disable it at the end)
cl_forcepreload "1" // default 0; Pre-load levels entirely into RAM (only use if you have 2GB of RAM or more)
// This reduces in-game stuttering, but may make you wait longer to join servers

// Personal Preference (modify as desired)
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
//sensitivity "10" // default 3; Set to personal preference (less than 10 is optimal)
cl_downloadfilter "nosounds" // Disables downloading of annoying SFX
cl_allowdownload "1" // Allows custom downloads from servers
cl_autohelp "0" // default 1; Turns off in-game help tips


// Crosshair Settings
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
crosshair "1" // Enable crosshair
cl_crosshair_alpha "255" // default 255; Sets crosshair transparency (0-255; 255 = No Transparency)

cl_crosshair_red "255" // default 138; Sets crosshair color (RGB) - Red value (0-255)
cl_crosshair_green "0" // default 182; Sets crosshair color (RGB) - Green value (0-255)
cl_crosshair_blue "0" // default 220; Sets crosshair color (RGB) - Blue value (0-255)

cl_crosshair_thickness "1.5" // default 2; Sets crosshair thickness
cl_observercrosshair "1" // Enables crosshair in spectator mode
cl_crosshair_dynamic "0" // default 1; Disables dynamic crosshair


// Lighting & Material Settings
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
r_dynamic "0" // default 1; Disables dynamic shadows (may have no effect in l4d2)
r_PhysPropStaticLighting "0" // default 1;
r_ambientfraction "0.2" // default 0.2;
r_radiosity "4" //

mat_bloom_scalefactor_scalar ".5" // default 1;
mat_monitorgamma_tv_enabled "1.6" // default 0; Increases brightness dramatically


// Sound Options
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
dsp_enhance_stereo "1" // default 0;


// Props
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
func_break_max_pieces "0" // default 15; Removes debris
cl_phys_timescale "1.0" //


// Netcode Tweaks
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
cl_updaterate "30" // default 20;
cl_cmdrate "30" // default 30;
rate "30000" // default 10000;
cl_resend "1.5" // default 6; How many seconds to wait before retrying to connect to a server
cl_interp "0.067" // default 0.1; Improves hit registration
cl_lagcompensation "1" // default 1; Improves hit registration

//net_graph "1" // default 0;
//net_graphpos "3" // default 1;
//net_graphheight "60" // default 60; 740 is good value for 1024x768
//net_graphproportionalfont "0" // default 1;
//budget_show_history "0" // default 1; Disables history graph


// Player Model Tweaks
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
r_eyemove "0" // default 1; Disables realistic eyeball movement
r_eyesize "0" //
r_eyeshift_z "0" //
r_eyeshift_y "0" //
r_eyeshift_x "0" //



// Disable cheats (to disable you from taking advantage!)
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
//
sv_cheats "0"

bind K Vocalize PlayerWatchOutBehind
bind L Vocalize PLayerHurrah


I'm a fan of your cfg's!
Though it didn't work so good on karsiah yesterday - 65 FPS WTF
Parent
Well not karsiah, forgot the name. with the boat and all :D
You and ur config are still awesome!!
Parent
Back to top