lol monitor

just got my iiyama vision master pro 454 but the image is kinda very unsharp, installed drivers and 1600x1200 @ 100 hz

someone knows how to fix it?

(connected with vga - vgatodvi)
Comments
19
WANTS :<
haha, you won't get it :D
Parent
Maybe thats the reason why they actually sold it for such a low price to you.
100Hz LoL, that's 40 more than i have :D
what did u expect, that's not tft ;D
tweak convergence, moire and stuff @ the menu and it should be better

+ imo 1600x1200 is too much for 19'', use 800x600 or 1200x900 @ gaming
1600x1200 is, indeed, a bit too much for most 19" CRT monitors. Not only because you'll need binoculars to see what's on the screen, but also because the resolution doesn't physically fit on the screen.

Iiyama Vision Master Pro 454 has a 18" viewable area (45,72 cm). It also has a 0.25 mm dot pitch, meaning the physical space each pixel requires is 0.25 mm. As the aspect ratio of the monitor is 4/3, the screen's width is probably about 365 mm and height about 275 mm.

If you divide 365 mm with 0.25 mm, you'll notice, that the maximum amount of pixels the monitor can display horizontally is 1460. 140 pixels are dropped when using 1600x1200 resolution. Same with height, 275/0.25=1100, a good hundred pixels gone.

Will one notice the missing pixels? Most likely not. But they're still gone! ;)
Parent
should be some image quality setting on it found using the menu button, don't remember 100% but image/color/brightness and all that was much better if set to picture instead of text, you also have movie setting for that extra sharpness and color.

Used to have that monitor and loved it :>
Is it still blurry at 1024 x 768 at 100 Hz? If so, return it to the shop, otherwise check your manual and the OSD.
only the top on the left anr right
Parent
Like NViz said, check your manual and the OSD for those presets to begin with, some can increase contrast considerably. Otherwise try to find other functions, there's always the Reset to Factory Default option if you fuck it up. If all else fails, get a new monitor.
Parent
the middle is still blurred, in ET my xhair is fucked;(
Parent
LOOK FOR CONVERGENCE @ THE MENU

http://www.softpedia.com/get/Multimedia/Video/Other-VIDEO-Tools/Nokia-Monitor-Test.shtml

2nd button (red green and blue crosses)
set convergence at the level so they should make a perfect grid
Parent
heb hem nu al aardig ;P
lol try uuh you see those 6 buttons you have..
left menu then those 4buttons then the video 1/2

hit the arrow that points to the ground Lol and then put it on picture or movie.. tbh movie fucking blows here
DPI rating?
im suprised CRT isnt sharp, tend to be much better than LCD
LCD > CRT
eot.
Back to top