S243HL Acer 24" settings

by kasztanx • 11 Aug 2011, 21:21 • Forums › Enemy Territory
hello, recently bought a monitor
S243HL Acer 24 "Widescreen Monitor LED Slim and I do not know what the resolution set in the et and what refresh please help
Comments
11
▼
wedeus 11 Aug 2011, 22:25
Highest resolution possible, and the same goes with refresh rate
▼
bira 11 Aug 2011, 22:43
I use r-mode 4 on my 23" LCD, ftw!
Parent
▼
vib 11 Aug 2011, 22:27
native resolution for minimal input/output lag, but I prefer to use a 4:3 non-stretched reso on my 16:9 monitor.

(instead of using my native resolution which is 1920x1080, I use 1280x1024 [the amount of vertical pixels is only slightly lower, so the picture is still quite crisp])
▼
kasztanx 11 Aug 2011, 22:41
what about displayrefresh ?? on this resolution 1280x1024 i set most 75hz
Parent
▼
vib 11 Aug 2011, 22:47
the highest possible which is 120 hz in my case
Parent
▼
kasztanx 11 Aug 2011, 22:55
in my 75 :P
Parent
▼
vib 11 Aug 2011, 23:08
that's okay. if you've never played for a long period with 100 or 120 hz than 75 hz is just fine. but if you would be using 120 hz and then someday were forced into using 75 hz (due to i.e. a broken monitor), you would be screaming your head off with the word 'cancer'.
Parent
▼
GreenClon 12 Aug 2011, 01:35
I have to so agree
Parent
▼
Nicolah 11 Aug 2011, 22:42
1920 1080
▼
ag0n 12 Aug 2011, 07:47
The best should be max hz available and native resolution.

But i have a full hd lcd with 120hz and i don't use fullhd. Thanks to retarded cb configs and engine bugs. (120 fov at full hd feels like 105 fov... if cb would allow fov 140 i could finally use my screen at full hd)
Back to top